Model ESS-CD5888ESS Security Doors are specifically designed and manufactured to be tough and dependable. They are strong enough to withstand punishing personnel-ridden vehicle traffic yet lightweight enough to open easily, operate smoothly, and allow for damage free, safe passage for personnel and equipment.
Gasketing – Full perimeter gasketing provides thermal separation and is factory applied without the use of metal strips or fasteners, making it easy to replace in the field.
Door Panel – Patented, one-piece rotationally molded construction with ¼” thick cross-linked polyethylene outer skin, offers the lightest weight per panel of any USPS approved traffic door. This door offers extraordinary impact resistance and retains its properties to –40oF.
Internal Reinforcement – The leading and back edge of door are internally reinforced with tubular steel to ensure flatness and strengthen the door panel.
Upper Hinge – Double-acting V-Cam hinging system operates smoothly and is virtually maintenance free with its permanently lubricated needle bearing roller assembly. Optional stainless steel hinge is available.
Bottom Hinge – The bottom hinge attaches to the internal steel reinforcement and is constructed with a ductile iron, powder coated hinge shaft for traditional strength and durability. 11” aluminum industrial hinge guards are standard.
Bumpers – The ultimate in door protection, the rotationally molded high-impact teardrop bumpers act as a shock absorber, extending the life of the door. 38” high bumpers are standard on both sides of the door.
Additional Security – Upper and lower cane bolts, 2” chain or cable lock sleeves, and tamper proof fasteners are used for additional security.
Window – Double glazed 1/8” thick polycarbonate recessed vision panels with three security bars spaced 7” centers.
Insulated Core – The foamed-in-place Non-CFC urethane core (permanently bonded to the outer surface) does not break down when impacted, provides sound abatement, and excellent thermal separation with an R factor of 14.58.
RE-5 approved security doors are equipped with the following:
- Heavy-duty industrial teardrop bumpers
- Three security bars spaced on 7" centers.
- Double-glazed 1/8" polycarbonate recessed vision panels
- 5/8" upper and lower cane bolts.
- Heavy-duty hardware with spring assist and lower hinge guards
- 2" lock sleeve - accepts cable or chain for locking
- Full perimeter gasketing.
- Tamper proof fasteners with Internal steel reinforcement
- Directional signs
- Optional red/green bumper configuration.
Model ESS-CD0888Lightweight Service Doors open manually with minimal resistance and gently close by gravity. They provide exceptional value for a variety of applications including retail, supermarkets, restaurants and any other light to medium duty applications where durability, aesthetic appeal and low costs are considerations. Café style doors, jamb mounted or free standing, with gate hinge also available. Door Panel – Lightweight, durable doors are constructed of ¼" textured ABS plastic to resist dents, gouges and abrasions during normal use.
Optional impact plates are attached with locking fasteners for easy replacement.
Back Edge Spine – The entire length of the panel is reinforced at the back with 3 layers of 6” wide x ¼” thick ABS material, allowing for superior impact resistance and virtually eliminating broken spines.
Hinge – Both upper and lower hinge assemblies are bolted through our exclusive ¾” thick back-edge spine as opposed to the panel, for added strength and durability.
Window and Frames – Standard vision panels are 14” x 16” scratch resistant polycarbonate set in vacuum formed frames for a clean, low profile look and centered 60” from the floor
Model ESS-CD7888ESS 7888 Series Solid Core Doors allow you to create your own personalized look with virtually unlimited selection of high pressure laminates, stainless steel, and .032 thick aluminum. These doors provide durability with aesthetic appeal and architectural claddings of your choice. Door Panel – The doors are constructed with a ¾” cabinet grade birch plywood for structural integrity.
Impact Plates – Stainless steel impact plates, standard on the 7888 model, are screwed to both sides of the door’s surface.
Hinge – Proven hinge system mounts to the jamb with offset cam system and hardened rollers, for years of service with minimal maintenance.
Standard 18 gauge stainless steel edge capping presents a clean, finished appearance and extra edge protection. Optional perimeter gasketing provides a positive seal for thermal and visual separation.
Window and Frames – Each window is ¼” polycarbonate with either a vacuum formed frame or gasket. All windows are factory installed.
Note: 9” x 14” is standard, additional sizes are available.
Model ESS-XLP-0888A revolutionary new double acting traffic door offering a contemporary “designer style” look with a 3 dimensional surface. Integrated “baseball bat” bumpers above and below the window add built-in protection against abusive traffic. The XLP-0888 improves productivity by getting people and product through the door even faster. The door is designed to compliment today's more vibrant store décor, open and close faster and easier, be safer to use, simple to install and easy to maintain. SpringFX™ Technology – improves productivity by turning impact energy into opening speed with SpringFX technology. As the door absorbs an impact, the lightweight “hollow core” plastic door and bumpers will compress back to their normal shape accelerating the opening speed.
Door Panel – Exclusive “hollow core” panel is thin, flexible and lightweight. The shell uses a recyclable polyethylene plastic and has a minimum wall thickness of 1/8”, overall panel thickness varies from 1” to 2” due to its 3 dimensional surface of “baseball bat” bumpers below and above the window.
Window and Frames – To aid in safety the door comes standard with a large, 7” x 30” oblong ADA and OSHA compliant window, which provides better visibility and reduces accidents. To compliment the door a black rubber molding is used for the frame.
Back Edge Spine – For added strength and durability, the entire length of the panel is reinforced at the back with a one piece continuous extruded aluminum with flanges that wrap the door panel. The spine is powder coated gray or black.
Soft Front Leading Edge – The leading edge has a molded in extrusion to accept a soft leading edge safety gasket. Bi-parting doors use a blade gasket.
Hinge – The Ultra Soft Touch™ (patent pending) assisted gravity hinge system (patent pending) is “hidden” in the back spine. There are no unattractive upper panel cutouts or large corner hinge components visible. The hinge system is pre-installed, saving installation time and money. The hinge contains a coil spring so the door opens and closes fast. The hinge allows for extra wide swing, reducing damage to the panel. Panel centering adjustment is located at the bottom of the door.
Model ESS-CD-XLS528The Durulite Evolution XLS528 is an excellent alternative to the traditional, limited swing insulated door that is easier to open, safer to use, more durable, reliable and energy efficient. A refined swing action and component reliability were achieved by testing the panel and hinge system with over one million cycles of accelerated life testing.
Door Panel - Lightweight door panel is easy to open, operates smoothly and allows for safe passage of personnel and equipment. The overall panel thickness is 1.75" and can be sized up to 8' x 9'. The durable roto-molded polyethylene plastic panel is unaffected by water, detergents, chemical solvents and petroleum products.
Window - Windows are ADA and OSHA compliant 10” x 30”, two piece injected molded, low profile frames with double vision pane 1/8” thick polycarbonate.
Based on research with current users of traffic doors, every aspect of this door has been carefully engineered to revolutionize traffic door functionality.
Hinge Swing - The extra wide XLS528 swings135º per leaf from the center closed position to give a full clear opening when bumpers are used. The extra wide swing maximizes a clear usable opening which allows for “vectoring” or beginning a turn immediately after going through the opening and insures that the bumpers do not block the opening. Lower metal cam and self-lubricating UHMW polyethylene cam and upper hinge bearing components are pre-lubricated.
Easy to push open and quicker to close! - The full length back spine contains the in-line cam, coil spring gravity assist hinge system that assures faster closing, quicker settling time with less “back and forth” over swing as the door finds its closed position. It also holds the door closed where a “wind” will keep the door hanging open in negative and positive air pressure environments.
Environmental barrier seals better - The Durulite Evolution provides superior thermal control because there are no hinge and jamb guard cut-outs. Full perimeter nose, floor, jamb and header seals eliminate difficult to seal notch openings for external hinges that are found at the top and/or bottom of a traditional door panel. Fully gasketed or partially gasketed versions are available.
Jamb Guard - Low profile 8” high cast metal jamb guard comes standard projecting 3.5” to maximize useable opening width, allowing larger loads to pass through the opening unobstructed.
For custom sizes consult EDWARDS DOOR SYSTEMS LIMITED @ 1-888-786-5623
Model ESS-100DL
The Durulite Industrial Door is the toughest traffic door in the industry. It is known for its ruggedness, ease of maintenance and long service life. This versatile door is capable of filling the needs of a wide variety of applications. From the daily rigors of forklift traffic, to refrigerated applications, to USDA and wash-down applications.
The strength of the Durulite Industrial is due to its rotationally molded cross-linked polyethylene construction. Standard tests for impact resistance indicates that cross-linked polyethylene is 5 times more puncture resistant and 3 times more flexible than ABS material. The corrosion resistant panel is ideal for wash-down applications as it has no gaps or joint seams.
The Durulite Industrial Door is the toughest traffic door in the industry. It is known for its ruggedness, ease of maintenance and long service life. This versatile door is capable of filling the needs of a wide variety of applications. From the daily rigors of forklift traffic, to refrigerated applications, to USDA and wash-down applications.
The strength of the Durulite Industrial is due to its rotationally molded cross-linked polyethylene construction. Standard tests for impact resistance indicates that cross-linked polyethylene is 5 times more puncture resistant and 3 times more flexible than ABS material. The corrosion resistant panel is ideal for wash-down applications as it has no gaps or joint seams.
Door Panel – Lightweight, weighing only 3.5 pounds per square foot, is easy to open, operates smoothly and allows for safe passage of personnel and damage free equipment. The overall panel thickness is 1-7/8”, the skin thickness is 1/4” thick and the door can be sized up to a 10’ x 10’. Cross-linked polyethylene outer skin retains it properties to –40oF.
Insulated Core – The foamed-in-place Non-CFC urethane core (permanently bonded to the outer surface) does not break down when impacted, provides noise control and excellent insulation with an R factor of 10.83.
Internal Reinforcement – The leading and back edge of door are internally reinforced with tubular steel to strengthen the door panel.
Gasketing – USDA accepted durable gasketing is factory applied without the use of metal strips or fasteners, making it easy to replace in the field.
Upper Hinge – Double-acting V-Cam hinging system operates smoothly and is virtually maintenance free with its permanently lubricated needle bearing roller assembly. Optional stainless steel hinge is available.
Bottom Hinge – The bottom hinge attaches to the internal steel reinforcement and is constructed with a ductile iron, powder coated hinge shaft for traditional strength and durability.
Window – 1/8” thick polycarbonate window with black aluminum frame is recessed a minimum of 1/8” from the face of the panel to protect the window’s surface from abrasion caused by passing loads
Model ESS-100GDDecor Designer Impact Doors with Custom Graphics
Store décor has become an essential element in creating an environment that is stimulating to your customers. Powerful, large formatted digital graphics can provide a fresh new look to enhance the environment in new construction or remodels.
- For designers, it's a new eye-level element to utilize in creating the total visual experience.
- Create unique transitions or dramatic visual breaks.
- Highlight or visually identify departments or sales areas.
- Add continuity to wall elements.
Hinge – Proven hinge system mounts to the jamb with offset cam system and hardened rollers, for years of service with minimal maintenance.
Window and Frames – Each window is ¼” polycarbonate with either a vacuum formed frame or gasket. All windows are factory installed. 9” x 14” is standard, additional sizes are available.
Edge Capping – Standard 18 gauge stainless steel edge capping presents a clean, finished appearance and extra edge protection.
Bottom Hinge – Heavy-duty bottom hinge pin stabilizes the panel in the frame
Model ESS-CD988Industrial Heavy Duty insulated doors are designed for strength and durability in tough, abusive applications. They provide visual separation, sound attenuation and thermal separation. The doors can be manufactured to fit virtually any size opening. The door is designed to comply with all USDA sanitation requirements.
Door Panel – The core of the insulated doors are 1-1/2” thick with a combination of wood and foam and are considered heavy-duty. Surface coverings include full height high pressure laminates, ABS impact resistant plastic, FRP, stainless steel, galvanized steel or aluminum.
Internal Reinforcement – Integrated tubular steel reinforcement from the hinge to the frame assures extra strength and durability.
Steel Spine – Steel spine reinforces the edge of the door against heavy impacts, standard on Proline doors over 36” wide, optional on doors under or equal to 36” wide. Recommended for heavy-duty applications.
Gasketing – Full perimeter replaceable gaskets are built into the ProLoc™ edge to stand up to heavy traffic while providing a positive seal for thermal separation. Partially gasket doors are optional.
Patented ProLoc™ Edge System – Chemically bonds to the face sheets providing a positive seal and preventing moisture or contaminates from entering the door panel.
Hinge – Patented V-Cam hinging system has a 250° hinge that swings 125° in each direction, wide enough to allow the entire door and bumper to completely clear the opening.
Window & Frames – ABS window frames are chemically bonded for a permanent seal that stands up to repeated wash-downs. Single pane 1/8” thick polycarbonate window is used in the wood core doors, double pane windows are used in insulated doors.
Preventative Maintenance Program
Please contact us for further information, specifications and architectural details.
