


Rigidized Steel Toilet Partitions


Stainless Steel Rigidized Partitions
Edwards Door Systems Limited - 1-888-786-5623.

Construction:
Doors, panels, and pilasters shall be constructed of two sheets of type 304, #4 rigidized stainless steel with 5WL® pattern. Grain to run lengthwise (vertical) for all doors, pilasters, standard panels deeper than 60" will require horizontal grain pattern. The two rigidized sheets are laminated under pressure to a "Verti-cel" (½") honeycomb core for impact resistance, rigidity and sound deadening. Formed edges to be welded together and interlocked, under tension, with a roll-formed oval crown stainless steel locking bar, mitred, welded and ground smooth at the corners. Honeycomb to be of virgin, long fiber paper with a maximum 12.5mm (½") cell size and a minimum compressive strength of 90 pounds per square inch.
Doors, panels, and pilasters shall be constructed of two sheets of type 304, #4 rigidized stainless steel with 5WL® pattern. Grain to run lengthwise (vertical) for all doors, pilasters, standard panels deeper than 60" will require horizontal grain pattern. The two rigidized sheets are laminated under pressure to a "Verti-cel" (½") honeycomb core for impact resistance, rigidity and sound deadening. Formed edges to be welded together and interlocked, under tension, with a roll-formed oval crown stainless steel locking bar, mitred, welded and ground smooth at the corners. Honeycomb to be of virgin, long fiber paper with a maximum 12.5mm (½") cell size and a minimum compressive strength of 90 pounds per square inch.

Doors and Panels:
Shall be 25mm (1") thick with cover sheets not less than 22ga. (0.8mm).
Hardware and Fittings:
All panel and pilaster brackets and all door hardware shall be chrome plated zinc die castings. Doors shall be equipped with a gravity type hinge mounted on the lower pilaster hinge bracket.
Shall be 25mm (1") thick with cover sheets not less than 22ga. (0.8mm).
Hardware and Fittings:
All panel and pilaster brackets and all door hardware shall be chrome plated zinc die castings. Doors shall be equipped with a gravity type hinge mounted on the lower pilaster hinge bracket.

Standard Steel Partitions:
Doors, Panels and Pilasters shall be constructed of two sheets of panel flatness zinc-coated steel, Galvanneal ASTM A653 GR33, laminated under pressure to a honeycomb core for sound deadening and rigidity. Formed edges to be welded together and inter-locked under tension with a roll-formed oval crown locking bar, mitred, welded and ground smooth at the corners. Honeycomb to have a maximum 25mm (1") cell size with compressive strength of 31 pounds per square inch.
Doors, Panels and Pilasters shall be constructed of two sheets of panel flatness zinc-coated steel, Galvanneal ASTM A653 GR33, laminated under pressure to a honeycomb core for sound deadening and rigidity. Formed edges to be welded together and inter-locked under tension with a roll-formed oval crown locking bar, mitred, welded and ground smooth at the corners. Honeycomb to have a maximum 25mm (1") cell size with compressive strength of 31 pounds per square inch.

All as per our manufacturer's standards of design and fabrication.
Please contact us for further information, specifications and architectural details.