"Experienced and Dependable Door Solutions Since 1972"

Canada eds logo The Opening Experience

blankbtn-homeLaserLite Mx Bar Code Reader

mx  LaserLite Mx

LaserLite Mx is an exceptional high-performance data collector that offers a multitude of features. It combines laser bar code reading and Touch Memory button reading with an alphanumeric keypad. The ergonomic design provides one-handed operation for right or left-handed users, with a direct line of sight from the display to the laser beam to the bar code.

For sales information and details  Cont btn
please contact Edwards Door Systems Limited - 1-888-786-5623.
aroCompact, Ergonomic Design
aroDurable Metal Case
aroAlphanumeric Keypad
aroMemory Expansion to 8MB
aroVery Easy Operation
aroNo Rechargeable Batteries
aroReads Bar Codes and Touch Memory Buttons
aroCustom powder-coat colours and label engraving are available

The internal memory of LaserLite Mx consists of 128K flash ROM and 256K battery-backed RAM.

LaserLite Mx features a small external memory card known as a Solid State Floppy Disk Card, SSFDC, which adds 2MB, 4MB, or 8MB of memory. The enhanced memory and dual microprocessors allow for extensive searches, match inquiries, large cross-reference files, and multi-tasking capabilities.

LaserLite Mx's lightweight extruded and cast aluminum housing, with an industrial strength powder-coat finish, provides unbeatable durability!

Long-Lasting Power - This Battery System Is Terrific!
LaserLite Mx ships with four standard AA alkaline batteries that provide up to 2400 mAh of power capacity. Most importantly, the power system is based on a 3-volt instead of the 5-volt system found in other portables. This 3-volt system consumes power at a much slower rate; in fact, LaserLite Mx reads up to 100,000 bar codes or 300,000 memory buttons from one set of batteries!

It is easy to view battery status from the LCD display, and a lithium back-up battery protects your program and data while replacing batteries. If you prefer, LaserLite Mx can also be used with rechargeable NiCad or NiMH batteries.

Downloading Your Data
You have two ways to transmit data, either with a base station or an infrared (IR) transceiver.

The LaserLite Mx base station can be used alone or linked together for multiple downloading of up to 10 readers. The base station may be connected directly to a computer or to a modem for data transfer from a remote location. Both remote and host-initiated modem communication are supported. The base station also serves as a recharger for those who choose to install NiCad or NiMH batteries.

Your data can also be transmitted to an IR transceiver built into your computer or printer, or to an external IR transceiver that connects to your PC serial port.

Touch Memory Technology
Touch Memory buttons are used when durability, tamper-resistance, and simplicity are required. A Touch Memory button is a memory chip sealed inside a dime-sized stainless steel canister, and comes in read and read/write varieties. Each memory chip contains a pre-programmed 12-digit identification number that can be cross-referenced to a person, place, item, or activity.

Simply touch a button with the LaserLite Mx to record the button's ID number, and the time and date of the transaction.

Application Builder™ Software
Application Builder takes the complexity out of programming and allows you to quickly put LaserLite Mx to work. The package includes a graphical interface that allows you to draw the steps of your application and select the attributes you want for each step. Once your steps are created, a Properties window allows you to assign specific information about each step.

Also included is a complete set of developer's tools for custom programming. This one Application Builder software package can be used for LaserLite Pro, LaserLite Mx, LaserLite, and DuraTrax.

Specifications  LaserLite Mx
Aluminum case, weather-resistant
W 1.95"/1.75" (49.5/44.5 mm), D 2.19" (55.6 mm), L 7.61" (193.3 mm)
13.5 oz (383g)
128K flash ROM, 256K battery-backed RAM; Mx accepts 2MB, 4MB, and 8MB cards
Light Source
Visible laser diode operating at 670nm +/- 10nm
Optical Resolution
Element width: min., 0.0055" (0.14 mm); max., 0.2" (5.08 mm)
Scan Rate
36 +/- 3 scans per second
Scanning Range
2.5" to 24" (63.5 mm to 609.6 mm)
Scan Capacity
8,200 scans of 5-digit bar code or 6,000 button IDs with date and time
5% to 95% noncondensing
Thirty-two keys include: alphanumeric, scan, scroll, shift, enter, escape, backspace, free memory, battery voltage and five function keys
2-line x 16-character LCD
Primary Batteries
4-AA alkaline, lithium, rechargeable NiCad, or rechargeable NiMH
Back-up Battery
3-volt rechargeable lithium, approximate 10 year life
Valid scan LED, laser-on LED, key shift mode LED, battery voltage
Beeper, variable frequency and duration settings
Internal Clock
Real-time & date
Laser bar code, Touch Memory, key entry
Bar Code Symbologies
Code 3 of 9, Codabar, I-2 of 5, UPC, EAN, Code 128
Water & dust resistant
Touch Memory Buttons
Reads Dallas Touch Memory IDs
Data Storage
Bar code data, origin/family code, date & time
ASCII text file
Storage - 4º to 140º F (-20º to 60º C) Operating - 32º to 122º F (0º to 50º C)
One year
Application Builder - Windows 95/98/NT, Developer's environment - BASIC

Base Station Specifications
4.0" x 4.0" x 1.8" (102 x 102 x 46 mm)
7.4 ounces (210 g)
Power Supply Adaptors
120/220 v
Indicator Lights
Transmit, receive, power, charging
Connection Ports
RJ-11, RS-232
Serial Communications
Infrared to reader
LED Indicator
Battery charging activated

Installed and serviced across Canada and the U.S.A. by Edwards Door Systems Limited - 1-888-786-5623

For further information, specifications and technical details please contactEdwards Door Systems Limited.


Cont btn Home Button

Search our site