DuraFlex

Click here for  Sales Information and details

SECTION 10655 - Accordion Folding Partitions shall be DuraFlex as manufactured by Won-Door Corporation.

Operation: Shall be top supported and manually operated.

Construction: Shall consist of a single accordion-type wall of panels suspended from a single overhead track. Panels shall be connected by full height extruded vinyl hinges. Panels shall be formed of vinyl clad 24-gauge steel V-grooved for strength and resilience. Vinyl shall be permanently bonded to the face of the steel panels with a heat and pressure process before the panels are formed.

Suspension system: Shall consist of a single extruded aluminum track attached to the overhead structural support. Each panel shall be suspended by a 1" (.025) nylon-tired ball bearing roller. Each lead-post shall be suspended by a 4-wheel trolley.

Lead-posts: Shall be extruded aluminum and include standard grip-type handles and a sliding latch to effect closure. [Key locks shall be provided as required.]

Perimeter Seals: Shall consist of continuous extruded vinyl sweep strips attached to the top and bottom of the partition. Leading edges of the lead-posts and receiver posts shall be cushioned by extruded vinyl interlocking seals.

Hanging weight: shall be 1.9 pounds per square foot.

COLOURS:

Colours shall be selected by the architect from manufacturer's standard colours.  

PREPARATION BY GENERAL CONTRACTOR  

Openings shall be in the dimensions specified, plumb, and level. Headers shall be leveled with the finished floor to within +/- 1/4" (.006) tolerance over the entire length of the opening.

NOTE:  All headers, support structures, surrounding insulation, jambs, pocket doors, field painting, blocking and wood trim as required shall be furnished and installed by other sections and/or the General Contractor.

Contractor is required to supervise unloading and handling. Store boxes flat (not more than three high) in a dry area and protect from elements that may damage materials.

INSPECTION:

Contractor shall inspect prepared opening and immediately notify the architect, in writing, of any unacceptable conditions.

INSTALLATION:

Install partitions in accordance with manufacturer's printed instructions. Upon completion of the installation, the General Contractor shall protect partitions from damage and replace or repair subsequent damage so that partitions are acceptable to the architect, at no additional charge to the owner.

Warranty: All Won-Door materials shall be warranted against defects and workmanship for a period of one (1) year from the date of substantial completion.

REPRESENTATION ACROSS CANADA ~ SALES  -  INSTALLATION  -  SERVICE

For labelling information, specifications and architectural details

Please call:- 1-888-786-5623