CanDor  Can-Dor Pre-Finished Door Frames - Economical Solutions for Durable & Beautiful Interiors - Warnock-Hersey Certified Positive Pressure Approved with Lifetime Warranty

 

 

Click here for Sales Information and Details

 

Architectural Wood Frames   

 

 		 
Can-Dor Series 300 Pre-Finished Adjustable Door Frames Quality Products for Architect - Designer - Contractor Description: - An effective easy to install door frame for a more architecturally enhanced use. Applied casing permits a variety of aesthetically pleasing appearances. Adjustable to wrap unfinished openings, mitred and dowelled corners, with Warnock Hersey 20min fire rating and positive pressure certification. Available with Veneer of your choice with continuous and seamless lamination. Face finishes are paint or wood veneer, factory pre-finished to a furniture quality finish with a lifetime warranty, "Guaranteeing Total Customer Satisfaction".
Wrap Around Frame
Architectural Wood Frames

 

Can-Dor Pre-Finished Interior Wood Veneer Frames

 


Can-Dor Series 300 Adjustable Frames with Fire Rating

Description
A cost effective easy to install door frame for general purpose use. Face finishes are paint or wood veneer.

A. Wall Cavity - Typical metal stud and drywall (by others).
B. Metal Stud - Recessed full depth of rough buck.
C. Wrap Around - Typically 1/2" (12.7mm).
D. Rough Buck - MDF recessed into wall cavity fixed to metal stud.
E. Stop - Affixed to frame. Wood to match frame available on special order.
F. Joint - Butt or mitre joint (mitre joint shown).
G. Hardware Preparation - Frames may be prepped for hardware (hinge prep shown).
H. Frame - Veneered MDF  
Options: Frames are supplied knocked down prefinished as specified and may be assembled and installed by EDS forces, prepped for hardware as required.

 

 

FIRE RATED FRAMES
CanDor Veneer wrapped frames can be supplied carrying a Warnock Hersey 20 minute certification. Certified frames conform to the conditions of acceptance of CAN4-S104, UL 10(B), ASTM E152, UBC 43-2 and NFPA 252 standards for fire testing of door assemblies

For fire rating purposes CanDor architectural walls are considered to be wall screens. Any design combination of door openings, doors and windows or windows alone may be used; subject to certain limitations and restrictions.

 
 
Reveal Frame
Architectural Wood Frames

Options: Frames are supplied knocked down, prefinished as specified and may be assembled and installed by EDS forces, prepped for hardware as required. 
Typical Reveal Frame Details

 

Can-Dor Interior Frames Adjustable to Suit Wall Size Mitred and Dowelled Corners with Stopless Glazing Systems 1. Door Frame with Plant on Stop.
2. Glazing Frame with Plant on Stops.
3. Split Door Frame with Plant on Stop.
4. Split Glazing Frame with Plant on Stops.
5. Single Rebated Door Frame (Special orders only!)
6. Rebated Glazing Frame with Plant on Stop.
7. Glazing Sill with Plant on Stop.
8. Split Glazing Sill with Plant on Stops.
9. Single Rebated Glazing Sill with Plant on Stop (Special Orders only!)

Casing Frame
 Architectural Wood Frames

 

Can-Dor Interior Frames for Finished Drywall Openings Available with Factory Pre-Finished Matching Veneers Description

A cost effective easy to install door frame for general purpose use. Face finishes are paint or wood veneer.

A. Wall Cavity - Typical metal stud and drywall (by others).
B. Metal Stud - 63.5mm - Recessed 12.7mm for rough buck.
C. Buck - MDF & wood veneer recessed into wall cavity fixed to metal stud.
D. Stop - Affixed to frame. Wood to match frame on special order.
E. Reveal - Usually 1/2" to 3/4", can be painted or veneered to match frame.
F. Joint - Butt or mitre joint (mitre joint shown).
G. Hardware Preparation - Frames may be prepped for hardware (hinge prep shown).
H. Frame - Veneered MDF  .

Options: Frames are supplied knocked down, prefinished as specified and may be assembled and installed by EDS forces, prepped for hardware as required. 

Typical Casing Frame Details

 1. Door Frame with Plant on Stop.
2. Glazing Frame with Plant on Stops.
3. Rebated Door Frame.
4. Rebated Glazing Frame with Plant on Stop Tacked.
5. Split Door Frame with Plant on Stop.
6. Split Glazing Frame with Plant on Stops

A. Wall Cavity - Typical metal stud and drywall (by others).
B. Metal Stud - Recessed full depth of rough buck.
C. Rough Buck - MDF recessed into wall cavity fixed to metal stud.
D. Stop - Affixed to frame. Wood to match frame.
E. Casing - Veneered MDF to match frame (may be profiled).
F. Joint - Butt or mitre joint (mitre joint shown).
G. Hardware Preparation - Frames may be prepped for hardware (hinge prep shown).
H. Frame - Veneered MDF.

WARRANTY
CanDor warrants all of its' products used under normal, recommended use for the life of the original installation. This is subject to the provisions of the company warranty form.

Call -- Edwards Door Systems Limited for further details and information - 1-888-786-5623

CanDor is an industry leader in providing proven interior frame solutions and custom interior solutions designed around your unique needs. CanDor helps you offer the richness of classic wood millwork in an affordable and efficient factory engineered format.

CanDor uses softwood lumber and medium density fibreboard to create interior window and door frame profiles. CanDor wraps each piece with your choice of veneer species and then finishes the piece to your spec. The result is a visually stunning, durable and dependable wall system of timeless beauty and utility with an almost unlimited amount of flexibility of species, finish and design.

Options: Frames are supplied knocked down, prefinished as specified and may be assembled and installed by EDS forces, prepped for hardware as required.

CanDor systems take the millwork out of the critical construction path - thus enabling other trades to move ahead more quickly and smoothly and without the worry of damaging finished millwork. CanDor frames are designed to be installed after many of the other trades have fully completed their work. Candor frames can even be installed after the flooring has been layed. Because CanDor frames are installed after the walls are erected, you are able to complete critical areas without having to install frames and side-lites as part of the integral wall structure. We know you will be impressed with the quality, engineering and clean aesthetic lines this product offers. 

CanDor interior frame systems have found homes in office interiors, shopping mall storefronts, restaurants, hotels and condominiums - any place where the enduring appeal of a fine crafted, wood interior is desired and appreciated.

 

REPRESENTATION ACROSS CANADA ~ SALES  -  INSTALLATION  - SERVICE

 

Please Contact us - for labelling information, specifications and architectural details.
Edwards Door Systems